New Construction Prewire in Nashville and Middle Tennessee
Wiring, Prewire and Acoustics

New Construction Prewire

Speaker wire, network cable, conduit and supports installed while walls are open, so the finished home is clean.

The best time to plan an AV system is before the walls are closed. Once drywall is up, adding cable means fishing through insulation and studs, cutting patches and compromising the finish. Prewire is the work done at the framing stage: speaker wire, network cable, coax, conduit and mounting supports in the right places. Builders and homeowners in Nashville ask us to plan prewire for new homes and major remodels so the finished rooms are ready for any system.

We start with a Free Estimate and a look at the plans. We talk through the rooms, the TV and speaker locations, the equipment closet and the way you expect to live. We create a prewire plan that lists each cable, conduit and box, and we coordinate with your builder, electrician and drywall crew on timing. At the framing stage, we install and label everything, test each run and document it on the plan. After drywall, we return for trim and system setup.

Planned with the builder

We coordinate with your builder, designer and electrician so cables, boxes and outlets land in the right places.

Labeled and tested

Every cable is labeled at both ends and tested, then documented, so nothing is a mystery later.

Room for the future

Conduit and extra cable make adding speakers, cameras or displays easy without opening walls.

Clean finished walls

TV outlets, speaker boxes and keypads are placed to look tidy and match the finish.

What is included

  • Plan and drawing review
  • Cable, conduit and box plan
  • Builder and electrician coordination
  • Speaker and TV support installation
  • Labeling and testing
  • Documentation
Before and after

See the transformation.

Drag the handle to compare.

After: an equipment closet with a tidy rack with straight, bundled cables, a clean power strip and room for ventilationBefore: an equipment closet with a closet shelf with loose cables, a few boxes with lights and a piled-up power stripBeforeAfter
A closet of loose cables replaced by a tidy equipment rack. From a closet shelf with loose cables, a few boxes with lights and a piled-up power strip to a tidy rack with straight, bundled cables, a clean power strip and room for ventilation.
Why it works

What you get with New Construction Prewire

Plan review

We study drawings and talk through each room.

Cable and conduit list

Every run listed before work starts.

Builder coordination

Timed with framing and drywall.

Support and box installation

Speaker backing and TV mounts planned.

Labeling and testing

Both ends labeled and tested.

Documentation

A plan showing where everything runs.

Try it now

AV Installation Budget Planner

Pick a job, set the quantity and add extras to see a ballpark planning range for your audio video project.

How it works

Our process, start to finish.

  1. 01

    Call and describe it

    You tell us what you want or what your system is doing, and we set an estimate visit that fits your day.

  2. 02

    Measure and plan

    We look at your room, walls and equipment, talk through screens, speakers, wiring and control and note any prep that is needed.

  3. 03

    Choose and confirm

    You choose the equipment and details, receive a plain written scope and approve it before anything is ordered or installed.

  4. 04

    Wire and prepare

    We run and label the cables, place supports and prepare the rooms, working with your builder or electrician when needed.

  5. 05

    Install and program

    We mount displays and speakers, connect and set up the equipment and program the remotes, scenes and apps.

  6. 06

    Tune and walk through

    We calibrate picture and sound, clean up, walk you through the finished system and explain how to use it.

Questions

New Construction Prewire FAQ

When should prewire happen?

After the framing is up and before insulation and drywall. Calling us during design is even better.

What does prewire include?

Usually speaker wire, network cable, coax, HDMI or conduit and boxes for TVs, keypads and equipment. We list it in your scope.

Can I add cables later?

Yes, if we leave conduit or a pull string. We recommend adding more than you think you need.

Do you work with my builder?

Yes. We coordinate with builders, electricians and drywall crews so everyone works from the same plan.

What if I am not sure what I will want?

We design for flexibility, with extra conduit and cable in key places. It costs little now and saves a lot later.

Next step

Get your Free Estimate for New Construction Prewire.

Tell us about your project and we will call you back to set up a visit.

Or call (615) 357-7797 to talk now.

Tell us about your audio video project

We will call you back to talk it through and set up a visit.

Prefer to talk? Call (615) 357-7797. We never sell your information.

Call NowFree Estimate