
Testing and repair for speaker wire, HDMI, network and coax runs that cause hum, dropouts or no signal.
Cables fail quietly. A speaker that crackles, a channel that drops out, an HDMI picture that sparkles or a network line that runs slowly may all come from a cable problem. Sometimes the cable is damaged inside a wall, sometimes it was pinched by a nail, and sometimes a connection simply loosened. Homeowners in Nashville call us when a system has a mysterious fault that needs careful testing instead of guessing.
We begin by describing the symptoms and testing the likely paths. We use cable testers and meters to check continuity, polarity and signal quality and we trace runs in walls with tone generators. We pinpoint the fault, then repair it with proper connections, replace a damaged section or run a new cable if that is the better fix. We test again and label the repaired cable, and we tell you what we found so you can decide what to do about other runs.
Meters and testers find the real fault, so we do not replace more than necessary.
Tone generators let us follow a cable through a wall and find where it was damaged.
We make splices and terminations properly, not with twist-ons and tape.
If a repair is not wise, we explain the choices, including a new cable run.
What you hear or see.
Meters and testers used.
Faults located in walls.
Strong, clean connections.
New run when needed.
Verified and documented.
Every topic has its own page with what to expect and how we approach it.
Top brandMarantzAn audio brand offering AV receivers, amplifiers, CD players and turntables, with Dolby Atmos support and HEOS wireless…Learn more
Top brandYamahaA brand whose home audio range includes AV receivers, hi-fi components, sound bars and home theater systems.Learn more
Top brandSANUSA maker of TV mounts, speaker stands, AV furniture and cable management, including full-motion and outdoor mounts.Learn more Pick the project and options to see a typical sequence from design to wiring to installation and training.
You tell us what you want or what your system is doing, and we set an estimate visit that fits your day.
We look at your room, walls and equipment, talk through screens, speakers, wiring and control and note any prep that is needed.
You choose the equipment and details, receive a plain written scope and approve it before anything is ordered or installed.
We run and label the cables, place supports and prepare the rooms, working with your builder or electrician when needed.
We mount displays and speakers, connect and set up the equipment and program the remotes, scenes and apps.
We calibrate picture and sound, clean up, walk you through the finished system and explain how to use it.
Common causes include a loose connection, damaged wire or a bad speaker terminal. We test each.
Sometimes at an access point, and sometimes a new run is better. We explain the options.
Sparkles, dropouts or no picture can come from a bad cable or connection. We test with known-good parts.
Yes. We test, re-terminate or replace as needed.
Yes. We test the ones that matter and document the results.
In-Wall Wiring and Cable ConcealmentSpeaker wire, HDMI, network and power routed inside walls and ceilings for a clean look, even in finished…Explore
AV Troubleshooting and RepairFinding and fixing no-picture, no-sound, remote and network problems in TVs, receivers, projectors and control systems.Explore
Structured Wiring and Cable ManagementNetwork, phone, coax and AV cabling run to a central panel and organized so it is easy to…Explore
HDMI and AV DistributionVideo and audio sent from one equipment rack to many TVs and rooms with matrices, extenders and simple…Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.