In-Wall Wiring and Cable Concealment in Nashville and Middle Tennessee
Wiring, Prewire and Acoustics

In-Wall Wiring and Cable Concealment

Speaker wire, HDMI, network and power routed inside walls and ceilings for a clean look, even in finished homes.

Visible wires make even the nicest equipment look temporary. Running cables inside walls and ceilings gives rooms a finished look and keeps cords from getting pulled, chewed or tripped on. In a finished home, it takes skill: you have to find the path, avoid pipes and wires and patch what you open. Homeowners in Nashville ask us to hide speaker wire, HDMI and network cable so systems look like they were built into the house.

We begin by inspecting the walls and ceilings for the likely path, using scopes and a careful look at the attic, basement or crawl space. We tell you what is possible and what compromises exist. We cut small, neat access points, fish the cable, use proper rated cable and wall plates and patch and clean. When a full path is not practical, we suggest paintable raceways or alternative routes. We test every cable before we close it up.

Rated cable

We use cable rated for in-wall use, so the work is safe and meets good practice.

Small, neat openings

We cut only what is needed, protect floors and furniture and clean up the dust.

Honest about limits

Some walls, such as fire blocks or masonry, limit routes. We explain options before we start.

Tested before closing

Every cable is tested before we patch and finish the wall.

What is included

  • Path and obstacle inspection
  • In-wall rated cable
  • Small, clean access points
  • Wall plates and trim
  • Raceway options
  • Testing and patching
Before and after

See the transformation.

Drag the handle to compare.

After: a living room with a TV mounted flat on the wall at a comfortable height with all cables hidden and a tidy console belowBefore: a living room with a TV sitting on a cluttered dresser with tangled black cables hanging down the wall behind itBeforeAfter
A TV on a cluttered dresser with tangled cables, mounted flat with hidden wires. From a TV sitting on a cluttered dresser with tangled black cables hanging down the wall behind it to a TV mounted flat on the wall at a comfortable height with all cables hidden and a tidy console below.
Why it works

What you get with In-Wall Wiring and Cable Concealment

Path inspection

Walls, attic and basement checked.

Rated cable

Safe for in-wall installation.

Neat access points

Small cuts, clean patches.

Wall plates

Finished look at each end.

Alternative routes

Raceways when needed.

Testing

Every cable verified.

Try it now

Which AV Service Do I Need? Quiz

Answer five questions about your space, goals and timing to see which services to start with.

How it works

Our process, start to finish.

  1. 01

    Call and describe it

    You tell us what you want or what your system is doing, and we set an estimate visit that fits your day.

  2. 02

    Measure and plan

    We look at your room, walls and equipment, talk through screens, speakers, wiring and control and note any prep that is needed.

  3. 03

    Choose and confirm

    You choose the equipment and details, receive a plain written scope and approve it before anything is ordered or installed.

  4. 04

    Wire and prepare

    We run and label the cables, place supports and prepare the rooms, working with your builder or electrician when needed.

  5. 05

    Install and program

    We mount displays and speakers, connect and set up the equipment and program the remotes, scenes and apps.

  6. 06

    Tune and walk through

    We calibrate picture and sound, clean up, walk you through the finished system and explain how to use it.

Questions

In-Wall Wiring and Cable Concealment FAQ

Can you run cables in a finished house?

Often yes. We use access points and fishing tools to route cable with minimal damage. Some walls need a different approach, and we explain.

Will you leave holes in my walls?

We patch the small openings we make and tell you whether paint is needed.

Can you hide speaker wire?

Yes. In-wall rated speaker wire can run to in-wall speakers or wall plates with hidden connections.

What about HDMI and power?

HDMI and power can be hidden with the right cable and in-wall power kits. We explain the best option for your wall.

Do you work in older homes?

Yes. Older homes often have plaster or odd framing, and we plan carefully for them.

Next step

Get your Free Estimate for In-Wall Wiring and Cable Concealment.

Tell us about your project and we will call you back to set up a visit.

Or call (615) 357-7797 to talk now.

Tell us about your audio video project

We will call you back to talk it through and set up a visit.

Prefer to talk? Call (615) 357-7797. We never sell your information.

Call NowFree Estimate